The following is an example of the CLI commands:
console>enable
console#config
console(config)# ip igmp snooping
console(config)# interface vlan 1
console(config-if)# ip igmp snooping mrouter learn-pim-dvmrp
console(config-if)# ip igmp snooping host-time-out 300
Console(config-if)# ip igmp snooping mrouter-time-out 200
console(config-if)# ip igmp snooping leave-time-out 60
console(config-if)# end
console# show ip igmp snooping groups
Vlan
-----
1
19
Console # show ip igmp snooping interface g1
IGMP Snooping is globally enabled
IGMP Snooping is enabled on VLAN 1
IGMP host timeout is 300 sec
IGMP Immediate leave is disabled. IGMP leave timeout is 60 sec
IGMP mrouter timeout is 200 sec
Automatic learning of multicast router ports is enabled
Console # show ip igmp snooping mrouter
VLAN
----
1
254
Configuring Switch Module Information
IP Address
------------------
224-239.130|2.2.3
224-239.130|2.2.8
Ports
------
g11
Querier
Ports
--------
-----
Yes
g11, g12
Yes
g11-13