Table of Contents
Advertisement
Figure 8-124. LAG Statistics
Interface Statistics — Selects the type of interface statistics to open.
Etherlike Statistics — Selects the type of Etherlike statistics to open.
RMON Statistics — Selects the type of RMON statistics to open.
GVRP Statistics — Selects the type of GVRP statistics to open.
Refresh Rate — Amount of time that passes before the statistics are refreshed.
Displaying LAG Statistics
1
Open the LAG Statistics page.
2
Select the statistic type to open.
3
Select the desired refresh rate from the Refresh Rate drop-down menu.
4
Click Draw.
The graph for the selected statistic is displayed.
Viewing LAG Statistics Using the CLI Commands
The following table summarizes the equivalent CLI commands for viewing LAG statistics.
287
Viewing Statistics
Advertisement
Chapters
Table of Contents
