Global Queue Settings - Dell PowerConnect 5316M User Manual

Figure 9-127. Global Queue Settings
Queue — The Queue number.
Strict Priority — Specifies if traffic scheduling is based strictly on the queue priority. This is the
default value for queues.
WRR — Specifies if traffic scheduling is based on the Weighted Round Robin (WRR) weights to
assigned egress queues.
WRR Weight (0-255) — Assigns WRR weights to queues. This field is enabled only for queues in
WRR queue mode. If a queue is set to 0 weight, the queue is not operational and is effectively
closed. Each queue has a weight range, queues 1-3 have the range 0-255, and queue 4 has the range
1-255.
% of WRR Bandwidth — The percentage translation of the weight defined in the WRR Weight
field.
Defining the Queue Settings
1
Open the Global Queue Settings page.
2
Define the fields.
3
Click Apply Changes.
The queue settings are defined, and the Ethernet switch module is updated.
Configuring Quality of Service
295