Snmp Trap Settings Cli Commands; Trap Recipient Table - Dell PowerConnect 5316M User Manual

Figure 6-70. Trap Recipient Table
Deleting a Trap Manager Table Entry
1
Open SNMP Trap Settings page.
2
Click Show All.
The Trap Recipient Table page opens.
3
Select a Trap Recipient Table entry.
4
Select the Remove check box.
5
Click Apply Changes.
The selected trap manager is deleted, and the switch module is updated.
Configuring Traps Using CLI Commands
The following table summarizes the equivalent CLI commands for setting fields displayed in the
SNMP Trap Settings page.
Table 6-40. SNMP Trap Settings CLI Commands
CLI Command
snmp-server enable traps
snmp-server trap
authentication
snmp-server host host-addr
community-string [1 | 2]
show snmp
The following is an example of the CLI commands:
Description
Enables the switch module to send SNMP traps
or SNMP notifications.
Enables the switch module to send SNMP traps
when authentication failed.
Determines the trap type sent to the selected
recipient.
Displays the SNMP communications status.
Configuring System Information
157