Query And Sort Cli Commands; Dynamic Addresses Table - Dell PowerConnect 5316M User Manual

Querying the Dynamic Address Table
1
Open the Dynamic Addresses Table.
2
Define the parameter by which to query the Dynamic Address Table.
Entries can be queried by Port, MAC Address, or VLAN ID.
3
Click Query.
The Dynamic Addresses Table is queried.
Sorting the Dynamic Address Table
1
Open the Dynamic Addresses Table.
2
From the Address Table Sort Key drop-down menu, select whether to sort addresses by
address, VLAN ID, or interface.
3
Click Query.
The Dynamic Addresses Table is sorted.
Querying and Sorting Dynamic Addresses Using CLI Commands
The following table summarizes the equivalent CLI commands for aging, querying, and sorting
dynamic addresses as displayed in the Dynamic Addresses Table.
Table 7-53. Query and Sort CLI Commands
CLI Command
bridge aging-time seconds
show bridge address-table [vlan
vlan] [ethernet interface | port-
channel port-channel-
number ]
The following is an example of the CLI commands:
console (config)# bridge aging-time 250
console (config)# exit
console# show bridge address-table
Aging time is 250 sec
vlan mac address
---- -----------
Description
Sets the address table aging time.
Displays classes of dynamically created
entries in the bridge-forwarding database.
port
----
type
----
Configuring Switch Module Information
203