Add An Alarm Entry - Dell PowerConnect 5316M User Manual

Falling Threshold — The falling counter value that triggers the falling threshold alarm. The falling
threshold is graphically presented on the bottom of the graph bars. Each monitored variable is
designated a color.
Startup Alarm — The trigger that activates the alarm generation. Rising is defined by crossing the
threshold from a low-value threshold to a higher-value threshold.
Interval (Sec) — Alarm interval time.
Owner — Ethernet Switch Module or user that defined the alarm.
Remove — When selected, removes an RMON Alarm.
Adding an Alarm Table Entry
1
Open the RMON Alarms page.
2
Click Add.
The Add an Alarm Entry page opens:
Figure 8-122. Add an Alarm Entry
3
Select an interface.
4
Complete the fields in the dialog.
5
Click Apply Changes.
The RMON alarm is added, and the Ethernet Switch Module is updated.
Modifying an Alarm Table Entry
1
Open the RMON Alarms page.
2
Select an entry in the Alarm Entry drop-down menu.
282
Viewing Statistics