Configuring Advanced Port Based Authentication - Dell PowerConnect 5316M User Manual

Table 7-44. Port Authentication CLI Commands
CLI Command
show dot1x [ethernet
interface]
show dot1x users [username
username]
The following is an example of the CLI commands:
console> enable
Console# show dot1x
Port Admin Mode Oper Mode
--------- ---------- ----------
g11 Auto
g12 Auto
g13 Auto
g14 Force-auth Authorized

Configuring Advanced Port Based Authentication

The Multiple Hosts page provides information for defining advanced port based authentication
settings for specific ports. To open the Multiple Hosts, click Switch →Network Security →
Multiple Hosts.
NOTE:
174
Configuring Switch Module Information
Description
Displays 802.1X status for the
for the specified interface.
Displays 802.1X users for the
Authorized
Authorized
Unauthorized
This feature may be effected on internal ports.
switch module
switch module
Reauth Reauth
Control Period
-------- ------
Ena 3600
Ena 3600
Ena 3600
Dis 3600
or
.
Username
--------
Bob
John
Clark
n/a