Figure 7-101. Protocol Port Table
Interface — Port or LAG number assigned to a protocol group.
Group ID — Protocol group ID to which the interface is assigned. Protocol group IDs are defined
in the Protocol Group Table.
VLAN ID — Attaches the interface to a user-defined VLAN ID. The VLAN ID is defined on the
VLAN Membership page. Protocol ports can either be attached to a VLAN ID or a VLAN name
(Range: 1-4094).
NOTE:
VLAN 4095 is the discard VLAN.
Adding a New Protocol Port
NOTE:
Protocol ports can be defined only on ports that are defined as General in the VLAN Port Settings
page.
1
Open the Protocol Port Table page.
2
Click Add.
The Add Protocol Port page opens.
3
Complete the fields in the dialog.
4
Click Apply Changes.
The new VLAN protocol group is added to the Protocol Port Table, and the switch module is
updated.
Configuring Switch Module Information
233