Last Response — The last time a response was received from the SNTP server.
Offset — Timestamp difference between the switch module local clock and the acquired time
from the SNTP server.
Delay — The amount of time it takes to reach the SNTP server.
Remove — Removes a specific SNTP server from the SNTP Servers list, when selected.
Adding an SNTP Server
1
Open the SNTP Servers page.
2
Click Add.
The Add SNTP Server page opens:
Figure 6-25. Add SNTP Server
3
Define the fields.
4
Click Apply Changes.
The SNTP Server is added, and the switch module is updated.
Displaying the SNTP Server Table
1
Open the SNTP Servers page.
2
Click Show All.
The SNTP Servers Table opens:
Figure 6-26. SNTP Servers Table
Configuring System Information
87