Managing Files; File Management Overview - Dell PowerConnect 5316M User Manual

console(config)# snmp-server enable traps
console(config)# snmp-server trap authentication
console(config)# snmp-server host 41.1.1.3 public 1
console# show snmp
Community-String
-------------------------------------
public_1
public_2
public_3
Traps are enabled.
Authentication-failure trap is enabled.
Trap-Rec-Address
-----------------
1.1.1.1
2.2.2.2
System Contact: 345 6789
System Location: 1234 5678

Managing Files

The File Management page contains fields for managing switch module software, the Image Files,
and the Configuration Files. Files can be downloaded from a TFTP server.

File Management Overview

The management file structure consists of the following configuration files:
• Startup Configuration File — Contains the commands required to reconfigure the switch
module to the same settings as when the switch module is powered down or rebooted. The
startup configuration file is created by copying the configuration commands from the
Running Configuration file or the Backup Configuration file to the Startup Configuration
file.
158
Configuring System Information
Community-Access
-----------------------------------
super
readwrite
readonly
Trap-Rec-Community
-------------------
public_1
public_2
IP address
-----------------------
1.1.1.1
2.2.2.2
3.3.3.3
Version
---------
1
2