Defining Queue Settings; Cos Interface Cli Commands; Global Queue Settings - Dell PowerConnect 5316M User Manual

Assigning CoS Interfaces Using the CLI Commands
The following table summarizes the equivalent CLI commands for configuring fields in the
Interface Settings page.
Table 9-89. CoS Interface CLI Commands
CLI Command
qos trust
no qos trust
The following is an example of the CLI commands:
console(config)# interface ethernet g15
console(config-if)# qos trust

Defining Queue Settings

The Global Queue Settings page contains fields for configuring the scheduling method by which
the queues are managed. SP queues have priority over WRR, and where the traffic is low, WRR
shares the bandwidth with SP, occupying the remaining bandwidth according to the weight ratio.
To open the Global Queue Settings page, click Quality of Service→ QoS Global Parameters→
Queue Settings in the tree view.
294
Configuring Quality of Service
Description
Enables the trust mode.
Disables Trust state on each port.