Vlan Port Cli Commands - Dell PowerConnect 5316M User Manual

Reserve VLAN for Internal Use — The VLAN selected by the user to be the reserved VLAN if not
in use by the system.
Assigning Port Settings
1
Open the VLAN Port Settings page.
2
Select the port to which settings need to be assigned from the Port drop-down menu.
3
Complete the remaining fields on the page
4
Click Apply Changes.
The VLAN port settings are defined, and the switch module is updated.
Displaying the VLAN Port Table
1
Open the VLAN Port Settings page.
2
Click Show All.
The VLAN Port Table opens.
Assigning Ports to VLAN Groups Using CLI Commands
The following table summarizes the equivalent CLI commands for assigning ports to VLAN
groups.
Table 7-62. VLAN Port CLI Commands
CLI Command
switchport mode {access | trunk
| general}
switchport trunk native vlan
vlan-id
switchport general pvid vlan-id
switchport general allowed vlan
add vlan-list [tagged |
untagged]
switchport general acceptable-
frame-types tagged-only
switchport general ingress-
filtering disable
The following is an example of the CLI commands:
Description
Configures a port VLAN membership mode.
Defines the port as a member of the specified
VLAN, and the VLAN ID as the "port default
VLAN ID (PVID)".
Configure the Port VLAN ID (PVID) when the
interface is in general mode.
Adds or removes VLANs for a port in general
mode.
Discards untagged packets at ingress.
Disables port ingress filtering.
Configuring Switch Module Information
227