Stp Port Settings Cli Commands - Dell PowerConnect 5316M User Manual

Enabling STP on a Port
1
Open the STP Port Settings page.
2
Select Enabled in the STP Port Status field.
3
Define the Fast Link, Path Cost, and the Priority fields.
4
Click Apply Changes.
STP is enabled on the port.
Modifying STP Port Properties
1
Open the STP Port Settings page.
2
Modify the Priority, Fast Link, Path Cost, and the Fast Link fields.
3
Click Apply Changes.
The STP port parameters are modified, and the switch module is updated.
Displaying the STP Port Table
1
Open the STP Port Settings page.
2
Click Show All.
The STP Port Table opens.
Defining STP Port Settings Using CLI Commands
The following table summarizes the equivalent CLI commands for defining STP port parameters
as displayed in the STP Port Settings page.
Table 7-56. STP Port Settings CLI Commands
CLI Command
spanning-tree disable
spanning-tree cost cost
spanning-tree port-priority priority
spanning-tree portfast
show spanning-tree [ethernet interface
| port-channel port-channel-number]
show spanning-tree [detail] [active |
blockedports]
The following is an example of the CLI commands:
Description
Disables spanning tree on a specific
port.
Configures the spanning tree cost
contribution of a port.
Configures port priority.
Enables PortFast mode.
Displays spanning tree configuration.
Displays the spanning tree status.
Configuring Switch Module Information
213