Figure 7-82. Port Security Table
Configuring Locked Port Security with CLI Commands
The following table summarizes the equivalent CLI commands for configuring Locked Port
security as displayed in the Port Security page.
Table 7-47. Port Security CLI Commands
CLI Command
shutdown
set interface active {ethernet
interface | port-channel port-
channel-number}
port security [forward |
discard | discard-shutdown]
[trap seconds]
show ports security {ethernet
interface | port-channel port-
channel-number}
The following is an example of the CLI commands:
Description
Disables interfaces.
Reactivates an interface that is shutdown due to
port security reasons.
Locks learning of new addresses on an interface.
Displays port lock status.
Configuring Switch Module Information
181