Dell PowerConnect 5316M User Manual page 206

Admin Flow Control — Enables/disables flow control, or enables the auto negotiation of flow
control on the LAG. Flow Control mode is effective on the ports operating in Full Duplex in the
LAG.
Current Flow Control — The user-designated flow control setting.
Defining LAG Parameters
1
Open the LAG Configuration page.
2
Select a LAG in the LAG field.
3
Define the fields.
4
Click Apply Changes.
The LAG parameters are saved to the switch module.
Modifying LAG Parameters
1
Open the LAG Configuration page.
2
Select a LAG in the LAG field.
3
Modify the fields.
4
Click Apply Changes.
The LAG parameters are saved to the switch module.
Displaying the LAG Configuration Table:
1
Open the LAG Configuration page.
2
Click Show All.
The LAG Configuration Table opens:
190
Configuring Switch Module Information