Add Bridge Multicast Group; Igmp Port/Lag Members Table Control - Dell PowerConnect 5324 User Manual

Table 7-75. IGMP Port/LAG Members Table Control Settings
Port Control Definition
D The port/LAG has joined the Multicast group
dynamically in the Current Row.
S Attaches the port to the Multicast group as
static member in the Static Row.
The port/LAG has joined the Multicast group
statically in the Current Row.
F Forbidden.
Blank The port is not attached to a Multicast group.
Adding Bridge Multicast Addresses
1
Open the Bridge Multicast Group page.
2
Click Add.
The Add Bridge Multicast Group page opens:
Figure 7-112. Add Bridge Multicast Group
3
Define the VLAN ID and New Bridge Multicast Address fields.
4
Toggle a port to S to join the port to the selected Multicast group.
5
Toggle a port to F to forbid adding specific Multicast addresses to a specific port.
Configuring Device Information
283