Setting The Effects; Turning An Effect On And Off - Boss GT-10 Owner's Manual

Chapter 2 Creating Sounds (Patch Edit)

Setting the Effects

Turning an Effect On and Off

The GT-10's internal effects are switched on and off with button controls. When an effect is switched on, the button's indicator
lights up; the indicator goes out when the effect is off.
[MASTER/PEDAL FX] does not light up.
The setting screen for the effects appears.
1.
(Press the button you pressed in step 1 a second time.)
2.
The effect is switched on or off.
3.
To select another effect to be switched on and off, repeat Steps 1 and 2.
On/Off Operations Using the PARAMETER Knobs
You can use the P1 through P4 knobs to switch on or off the effects whose icons are displayed in the PATCH EDIT screen or
MST/PDL FX screen.
34
• With [FX-1] and [FX-2], the settings for the
currently selected effect are shown.
• Pressing [MASTER/PEDAL FX] displays the
MST/PDL FX screen.
• If you want to name the patch or edit the name,
proceed to "Naming a Patch (PATCH NAME)"
(p. 41) before you save.
• If you want to save a tone with the settings
you've made, proceed as described in "Saving
a Patch (PATCH WRITE)" (p. 42).