Chapter 4 Playing Sounds; Setting The Functions Of The Knobs Of The Play Screen - Boss GT-10 Owner's Manual

Chapter 4 Playing Sounds

Setting the Functions of the Knobs of the Play Screen

You can change the functions of the PARAMETER knobs.
SYSTEM
The SYSTEM MENU screen appears.
1.
Select CONTROL.
2.
3. The CONTROLLER screen appears.
Select the SYS KNOB SETTING screen (page 1).
4.
Select the parameter knob (Knob P1–P4) whose assignment
5.
you want to change.
Change the parameter settings.
6.
7. To change another controller setting, repeat Steps 5–6.
The Play screen appears.
8.
twice.
46
For information on what settings you can assign,
refer to "Display of Parameters You Can Set with
SYS KNOB SETTING" (p. 138).
CONTROLLER parameters are system
parameters. They are saved at the time they are
entered, and do not require a Write procedure.