Boss GT-10 Owner's Manual page 53

About the Range of a Target's Change
The value of the parameter selected as the target changes within the range defined by "Min" and "Max," as set on the GT-10.
When using an external footswitch, or other controller that acts as an on/off switch, "Min" is selected with Off (CLOSED),
and "Max" is selected with On (OPEN).
When using an external expression pedal or other controller that generates a consecutive change in the value, the value of
the setting changes accordingly, within the range set by the minimum and maximum values. Also, when the target is of an
on/off type, the median value of the received data is used as the dividing line in determining whether to switch it on or off.
When using the footswitch:
Value
Max
Min
Off
Footswitch
When using the EXP Pedal:
Max
Min
0
When the pedal
is fully raised
EXP Pedal
About the Range of a Controller's Change
This sets the operational range within which the value of the setting changes when an EXP Pedal or other controller that
changes the value consecutively is used as the source. If the controller is moved outside the operational range, the value
does not change, it stops at "minimum" or "maximum."
(Example) With ActRngLo: 40, ActRngHi: 80
MAX
MIN
0 40
When the pedal ActRngLo
is fully raised
EXP PEDAL
* When using a footswitch or other on/off switching controller as the source, leave these at "ActRngLo: 0" and "ActRngHi: 127."
With certain settings, the value may not change.
On
Degree to
Which Expression
Pedal Is Depressed
127
When the pedal
is fully advanced
Degree to
Which Expression
Pedal Is Depressed
80 127
ActRngHi When the pedal
is fully advanced
Chapter 4 Playing Sounds
When controlling the On/Off target with the
EXP Pedal:
Value
On
Off
0
When the pedal
is advanced halfway
When the pedal
is fully raised
EXP Pedal
* The range that can be selected changes according to the target
setting.
* When the "minimum" is set to a higher value than the
"maximum," the change in the parameter is reversed.
* The values of settings can change if the target is changed
after the "minimum" and "maximum" settings have been
made. If you've changed the target, be sure to recheck the
"minimum" and "maximum" settings.
Value
On
Off
0 40 60
ActRng Center
When the pedal
Lo
value
is fully raised
EXP Pedal
Degree to
Which Expression
Pedal Is Depressed
127
When the pedal
is fully advanced
Degree to
Which Expression
Pedal Is Depressed
80 127
ActRng
When the pedal
Hi
is fully advanced
53