Adjusting The Exp Pedal - Boss GT-10 Owner's Manual

Adjusting the EXP Pedal

Although the GT-10's EXP Pedal has been set for optimum operation at the factory, extended use and the operating environment
can result in the pedal going out of adjustment.
If you encounter problems such as being unable to fully cut off the sound with the volume pedal or being unable to switch the
EXP PEDAL SW, you can use the following procedure to readjust the pedal.
SYSTEM
The SYSTEM MENU screen appears.
1.
Select PDL CALIBRATION.
2.
The PEDAL CALIBRATION screen appears.
3.
Depress the heel of the EXP Pedal.
4.
The message "OK" appears, and then the following screen is dis-
played.
5.
Depress the toe of the EXP Pedal.
6.
The message "OK" appears, and then the following screen is dis-
played.
7.
Chapter 5 Making Global Settings
If you press [CATEGORY/ENTER] without
pressing down on the heel of the EXP Pedal or
with an inappropriate EXP Pedal value (angle),
"Area Over" appears in the display, and you are
prevented from proceeding to the next step.
Readjust the pedal position.
If you press [CATEGORY/ENTER] without
pressing down on the toe of the EXP Pedal or with
an inappropriate EXP Pedal value (angle), "Area
Over" appears in the display, and you are
prevented from proceeding to the next step.
Readjust the pedal position.
77