Para Eq (Parametric Equalizer); Tone Modify - Boss GT-10 Owner's Manual

PARA EQ (Parametric Equalizer)

Adjusts the tonal quality. You can adjust the sound quality in
four bands.
Parameter/ Explanation
Range
Low Cut (Low Cut Filter)
This sets the frequency at which the low cut fil-
Flat,
ter begins to take effect. When "Flat" is selected,
55Hz–800Hz
the low cut filter will have no effect.
Low Gain
-20–+20dB Adjusts the low frequency range tone.
Lo-Mid f (Low Middle Frequency)
20Hz– Specify the center of the frequency range that
10.0kHz will be adjusted by the "Lo-Mid G."
Lo-Mid Q (Low Middle Q)
Adjusts the width of the area affected by the EQ
0.5–16 centered at the "Lo-Mid f." Higher values will
narrow the area.
Lo-Mid G (Low Middle Gain)
-20–+20dB Adjusts the low-middle frequency range tone.
Hi-Mid f (High Middle Frequency)
20Hz– Specify the center of the frequency range that
10.0kHz will be adjusted by the "Hi-Mid G."
Hi-Mid Q (High Middle Q)
Adjusts the width of the area affected by the EQ
0.5–16 centered at the "Hi-Mid f." Higher values will
narrow the area.
Hi-Mid G (High Middle Gain)
-20–+20dB Adjusts the high-middle frequency range tone.
High Gain
-20–+20dB Adjusts the high frequency range tone.
High Cut (High Cut Filter)
This sets the frequency at which the high cut fil-
700Hz–
ter begins to take effect. When "Flat" is selected,
11kHz, Flat
the high cut filter will have no effect.
Level
-20–+20dB Adjusts the volume before the equalizer.
Chapter 8 Parameters Guide

TONE MODIFY

This changes the tone of the connected guitar.
Parameter/ Explanation
Range
Type
Selects the type of tone modification.
Fat Fat tone with boosted mid range.
Presence Bright tone with boosted high-mid range.
Mild Mild tone with the high end cut back.
Tight Tone with the low frequencies cut.
Enhance Tone with the high frequencies boosted.
This produces a tone with greater power
Resonator 1, 2, 3 and punch by adding resonance in the
low-frequency range and midrange.
Resonance
This adjusts the strength of the low-end
0–100 and midrange resonance when Type is set
to Resonator 1, 2, or 3.
Low
Adjusts the tone for the low frequency
-50–+50
range.
High
Adjusts the tone for the High frequency
-50–+50
range
Level
0–100 Adjusts the volume.
105