Boss GT-10 Owner's Manual page 21

3
Adjust the Distortion
Using Tone Grid, adjust the distortion
until you get the sound you want.
For solos Cursor movement
Distortion: Soft
For backing
Horizontal
Cursor movement
If you switch patches, you'll lose all the settings you've made. To save the sound you've created, carry out the Write
procedure (p. 42).
You can take parameters you've adjusted with EZ TONE CREATE and fine-tune them further using EZ TONE EDIT or
parameter operations. For more information, refer to "Adjusting the Tone (Edit)" (p. 33).
Distortion: Hard
Vertical
4
Adjust the Other Effects
Using Tone Grid, adjust the effects until
you get the sound you want.
Ex. When you adjust the Delay
Delay sound: Wet (strong)
Delay time: Short
Delay sound: Dry (light)
Horizontal
Cursor movement
Quick Guide
Cursor movement
Delay time: Long
Vertical
21