Switching The Driver Mode - Boss GT-10 Owner's Manual

Switching the Driver Mode

Switches two operational modes, one which uses the special driver contained on the downloaded file, and one in which the OS's
(Windows/Mac OS) standard driver is used.
1. Quit all sequencer software and other applications on the computer that are
using the GT-10.
SYSTEM
The SYSTEM MENU screen appears.
2.
Select USB.
3.
The USB screen appears.
4.
Move the cursor to Driver Mode.
5.
Select the Driver Mode.
6.
"PLEASE RESTART" message appears.
Setting Explanation
Standard
Advanced
7. Turn the GT-10's power off and then back on again.
Chapter 7 Using the GT-10 Connected to a Computer Via USB
This mode uses the OS's standard USB driver.
You cannot use MIDI when Standard is selected as the driver mode. If you want to use MIDI with the USB connection, set the
GT-10 to the advanced driver mode.
This mode uses the special driver.
If you have not yet installed the special driver for the Advanced mode, turn off the power to the GT-10 in this condition and
install the driver.
The functions of a mode won't become available
until after the power has been turned off, then on
again.
91