Setting Phrase Loop - Boss GT-10 Owner's Manual

Deleting a Phrase (CLEAR)
The procedure for deleting a phrase differs according to the setting of the Clear Pdl parameter.
For information on the Clear Pdl parameter, refer to "Clear Pdl (Clear Pedal Function)" (p. 60).
When the Clear Pdl parameter is "Clear Only"
The phrase is deleted and the
unit goes into recording
1.
standby.

Setting Phrase Loop

You can also enable different uses by changing the parameters.
SYSTEM
1. The SYSTEM MENU screen appears.
Select PHRASE LOOP.
2.
The PHRASE LOOP screen appears.
3.
Move the cursor to select the parameter you wish to change.
4.
Change the parameter settings.
5.
Parameter/ Explanation
Range
Mode
This records the sound after it passes through the effects.
Performance
This lets you achieve a rich variety of performances by combining different tones.
This records the sound before it passes through the effects, and applies the effects during loop play.
Patch Edit
This enables you to adjust effects or compare patch tones.
When the Clear Pdl parameter is "Mute/Clear"
Pressing this during recording stops recording and puts
the unit in muted playback. (The PLAY indicator flashes.)
No sound is produced, but loop play continues inside the
1.
GT-10.
Pressing [BANK ▼] while the unit is muted enables nor-
mal loop playback. (The PLAY indicator lights up.)
Pressing this while the sound is muted deletes the phrase
2.
and puts the unit in recording standby.
Chapter 4 Playing Sounds
59