Chapter 6 Using the GT-10 with External MIDI Devices Connected
Making the Settings for MIDI Functions
Here is a description of the GT-10's MIDI functions. Set them as needed, depending on the intended use.
SYSTEM
1.
The SYSTEM MENU screen appears.
Select MIDI.
2.
The MIDI MENU screen appears.
3.
Select SETTING.
4.
The SETTING screen appears.
5.
6.
Select the parameter.
7.
Change the setting's value.
Setting the MIDI Receive Channel
This sets the MIDI channel used for receiving MIDI messages.
1. Follow the procedure in "Making the Settings for MIDI Functions" (p. 80) to
move the cursor to "Rx Channel."
2.
Set the desired
value.
1–16
80
Set each parameter as necessary. For details on
these settings, refer to the following sections.