Chapter 7 Using the GT-10 Connected to a Computer Via USB
Setting the USB Functions
The following section describes the GT-10's USB-related functions.
Make these settings in accordance with how you plan to use the GT-10.
Setting the Digital Audio Signal Input and Output
This lets you adjust the volume level of the digital audio signals output from the GT-10 and adjust the amount of digital audio
from USB (computer) to be mixed in.
SYSTEM
The SYSTEM MENU screen appears.
1.
Select INPUT/OUTPUT.
2.
The INPUT/OUTPUT screen appears.
3.
Select the TOTAL (page 3) screen.
4.
Move the cursor to USB/DGT Out Lev or USB Mix Level.
5.
Adjust the parameters.
6.
Parameter
USB/DGT Out Lev
USB Mix Level
92
Explanation
Adjusts the volume level of the digital audio signals output to the USB (Computer) and DIGITAL OUT connectors.
Sets the volume level of the mixed digital audio signals from USB (Computer) when INPUT SELECT (p. 61) is set
to "Guitar 1–3."