Chapter 1 Playing Sounds
Turning Off the Power
Before turning off the power, confirm the following.
• Is the volume on the GT-10, your amp, and all other connected devices turned down to the minimum level?
1. Turn off the power to the guitar amp (power amp) → any external effects
processors and other devices.
2.
Turn the GT-10's power off.
Tuning the Guitar (TUNER)
When the Tuner is turned on, sounds input to the GT-10 are output directly as is (bypassed), and the tuner is activated.
Under these conditions you can then tune your guitar.
Turning the Tuner Function On and Off
The tuner is switched on or off.
1.
About the Display During Tuning
With the GT-10's internal tuner, the Note Name and the Tuning Guide are shown of the display, indicating the difference between
the input sound and the sound in the display.
When the difference from the correct pitch falls within 50 cents, the Tuning Guide then indicates the size of that difference. As you
watch the Tuning Guide, tuning until the center indicator lights up.
fig.07-090
26
Note Name
Tuning Guide
Too High
Tuned
Too Low