Chapter 6 Using the GT-10 with External MIDI Devices Connected
Sending CTL Pedal Operations as Control Change Messages
This sets the controller number when CTL 1 and CTL 2 pedal switch operation data is output as Control Change messages.
1. Follow the procedure in "Making the Settings for MIDI Functions" (p. 80) to move
the cursor to "CTL1 Out" or "CTL2 Out."
2.
Set the desired
Off
value.
CC#1–CC#31,
CC#64–CC#95
Sending External Footswitch Operations as Control Change Messages
This sets the controller number when operation data from the footswitch connected to the CTL 3,4 jack is output as Control
Change messages.
1. Follow the procedure in "Making the Settings for MIDI Functions" (p. 80) to move
the cursor to "CTL3 Out" or "CTL4 Out."
2.
Set the desired
Off
value.
CC#1–CC#31,
CC#64–CC#95
Control Change messages are not output.
This sets the controller number when CTL 1 and
CTL2 pedal operation data is output as Control
Change messages.
Control Change messages are not output.
This sets the controller number when external
footswitch operation data is output as Control
Change messages.
83