Rear Panel - Boss GT-10 Owner's Manual

Rear Panel

1. INPUT Jack
The guitar is connected here.
2. OUTPUT L/MONO R Jacks
Connect to your amp, mixer, or such device.
3. PHONES Jack
Connect headphones here.
When headphones are connected to the PHONES jack, tonal adjustments
are applied so the sound is close to that produced by a guitar amp.
4. EXT LOOP SEND RETURN Jacks
Connect to external effects processor or amp.
5. AMP CONTROL Jack
When using the AMP CONTROL function (p. 132),
connect to the jack used for switching guitar amp
channels.
6. EXP PEDAL/CTL 3, 4 Jack
Connect an optional expression pedal (such as the
Roland EV-5) or footswitch (such as the BOSS FS-6) here
(p. 22).
7. USB Connector
Use a USB cable to connect a computer to this connector
and enable exchange of data between the GT-10 and the
computer (p. 90).
8. DIGITAL OUT Connector
Outputs digital audio signals (p. 66).
9. MIDI IN/OUT Connectors
Connect an external MIDI device to these connectors to
transmit and receive MIDI messages (p. 79).
10. POWER Switch
Turns the power on and off.
11. DC IN (AC Adaptor) Jack
Connect the included AC adaptor here.
* To prevent damaging the GT-10, please be sure not to use any
AC adaptor other than the one included with the GT-10.
1 2 3 4
Names of Things and What They Do
5 6 7 8
12. Cord Hook
Hook the AC adaptor cord here to prevent the adaptor
plug from being disconnected (p. 22).
* Disconnecting the AC adaptor while the GT-10 is in use may
result in corruption of important data.
13. Security Slot (
)
Connect a commercially available anti-theft security
cable here.
http://www.kensington.com/
10 11
9 12 13
13