Storing Settings By Effect (User Quick Settings) - Boss GT-10 Owner's Manual

Chapter 3 Saving a Tone

Storing Settings by Effect (User Quick Settings)

In addition to storing settings in the form of patches, you can also store settings for individual effects.
Since you can use such stored settings in other patches, just like with the Preset Quick Settings (p. 35), storing effects settings you
like ahead of time User Quick Settings is a convenient way to create new patches.
PREAMP for each channels
OD/DS
DELAY
1. The PATCH COPY screen appears.
Select the effect settings you want to save.
3-020d
2.
The screen for specifying the destination to which to save the settings
appears.
3.
Select the save-destination for the settings.
4.
The settings are saved.
44
Effects That Can Be Stored
CHORUS
REVERB
COMP
EQ
PEDAL FX WAH and Pedal
Bend
SEND/RETURN
• To save ASSIGN 1-8 settings (p. 50), set the
SOURCE parameter to ASSIGN 1-8.
• When PREAMP is the source, the settings in
the currently selected channel set by Channel
Select (p. 98) will be saved. For FX-1/FX-2, the
settings in the currently chosen effects set by
FX1/FX2 (p. 102) will be saved.
• The PREAMP channels change with each press
of [PREAMP].
• The effects shown below change with each
press of [MASTER/PEDAL FX].
- PEDAL WAH
- PEDAL BEND
- SEND/RETURN
- ASSIGN 1–8
When you want to change the User Quick Setting
name (12 characters), press [DISPLAY MODE]. For
information on how to enter characters, refer to
steps 4 through 6 of "Naming a Patch (PATCH
NAME)" (p. 41).
FX-1/FX-2 Effects
ASSIGN1–8