Using Pedals To Control The Parameters; Using The Ctl/Exp Pedal With The Same Functions Assigned At All Times (Pedal Function) - Boss GT-10 Owner's Manual

Using Pedals to Control the Parameters

Using the CTL/EXP Pedal With the Same Functions Assigned at All
Times (Pedal Function)
This applies the functions of the CTL pedal, EXP Pedal and EXP PEDAL SW globally to the GT-10.
SYSTEM
The SYSTEM MENU screen appears.
1.
Select CONTROL.
2.
The CONTROLLER screen appears.
3.
Select the controller whose assignment you want to change.
4.
Select Prefernc.
5.
Set the Prefernc parameter to System.
6.
Select the parameter of the chosen controller whose settings
7.
you want to change.
Change the parameter settings.
8.
9. To change another controller setting, repeat Steps 4–6.
The Play screen appears.
10.
twice.
Chapter 4 Playing Sounds
For information on what settings you can assign,
refer to "Function" (p. 138).
CONTROLLER parameters are system
parameters. They are saved at the time they are
entered, and do not require a Write procedure.
47