Using the Dial to Select the Patch
Select the Patch.
1.
Separating Patches into Groups (CATEGORY)
The GT-10 includes a function that allows you to categorize patches into a number of different groups. This is called the
CATEGORY function (p. 39). Specifying the category for each patch makes searching for patches more convenient.
The CATG screen appears.
The categories and the patches in these categories are shown in list
format.
1.
Select the category.
2.
The GT-10 switches to the selected patch.
3.
Adjusting a Tone
On the GT-10, the master equalizer parameters are assigned to the PARAMETER knobs of the Play screen by default.
You can use these PARAMETER knobs to adjust the sound quality globally, for all patches.
Select the Patch.
1.
P1 knob: Adjust the low frequency range tone.
2.
P2 knob: Adjust the middle frequency range tone.
P3 knob: Adjust the high frequency range tone.
Chapter 1 Playing Sounds
On the GT-10, you cannot switch patches in any
screen other than the Play screen. Press [EXIT] to
return to the Play screen (p. 24).
• On the GT-10, you cannot switch patches in
any screen other than the Play screen. Press
[EXIT] to return to the Play screen (p. 24).
• You can also display the CATG screen from
PATCH SEARCH in the SYSTEM screen.
31