Chapter 2 Creating Sounds (Patch Edit); Creating Sounds With Ease (Ez Tone); Creating A Tone For The Song You Envision (Create) - Boss GT-10 Owner's Manual

Chapter 2 Creating Sounds (Patch Edit)

Creating Sounds with Ease (EZ TONE)

Creating a Tone for the Song You Envision (Create)

If you already have a clear idea about the kind of sound you want to create, you can save yourself a lot of trouble by starting out
with a patch that is relatively similar to what you have in mind, then tweak its settings until you arrive at what you want.
EZ TONE CREATE lets you create sounds easily by choosing settings close to the musical genre and the feel of the song you want
to compose.
The SETTING screen for EZ TONE CREATE appears.
1.
P1, P2 knob: This selects the pickup type.
2.
P3, P4 knob: This selects the equipment connected to the GT-10.
The TONE screen for EZ TONE CREATE appears.
3.
P1, P2 knob: This selects the basic tone.
4.
P3, P4 knob: This selects a variation.
The DRIVE Tone Grid for EZ TONE CREATE appears.
5.
P1, P2 knob: This adjusts the distortion (DRIVE).
6.
P3, P4 knob: This adjusts the volume level of the distortion.
The EFX Tone Grid for EZ TONE CREATE appears.
7.
Adjust the effects until you get the sound you want.
(Ex.) When you adjust the Delay effect
8.
P1, P2 knob: Adjusts the delay time.
P3, P4 knob: Adjusts the volume level of the delay.
32
Switching patches causes all settings that have
been made to be lost. To save the sound you've
created, carry out a Write operation (p. 42).
You can take parameters you've adjusted with EZ
TONE CREATE and fine-tune them further using EZ
TONE EDIT or parameter operations. For more
information, refer to "Adjusting the Tone (Edit)" (p. 33).