Fx-1/Fx-2; T.wah (Touch Wah) - Boss GT-10 Owner's Manual

Chapter 8 Parameters Guide

FX-1/FX-2

With FX-1 and FX-2, you can select the effect to be used from
the following. You can select the same effect for FX-1 and FX-2.
FX Select
T.WAH
AUTO WAH
SUB WAH
ADV.COMP
LIMITER
GRAPHIC EQ
PARA EQ
TONE MODIFY
GUITAR SIM.
SLOW GEAR
DEFRETTER
WAVE SYNTH
GUITAR SYNTH
SITAR SIM.
OCTAVE
PITCH SHIFTER
HARMONIST
AUTO RIFF
SOUND HOLD
AC.PROCESSOR
FEEDBACKER
ANTI-
FEEDBACK
PHASER
FLANGER
TREMOLO
ROTARY
UNI-V
PAN
SLICER
VIBRATO
RING MOD.
HUMANIZER
2X2 CHORUS
SUB DELAY
Parameter/ Explanation
Range
FX-1, FX-2 ON/OFF (Effect ON/OFF]
Turns the FX-1 (FX-2) effect on/off.
Off, On Pressing [FX-1], [FX-2] switches On and
Off.
FX Select
see above Selects the effect to be used.
102
Touch Wah p. 102
Auto Wah p. 103
Sub Wah p. 103
Advanced Compressor p. 104
Limiter p. 104
Graphic Equalizer p. 104
Parametric Equalizer p. 105
Tone Modify p. 105
Guitar Simulator p. 106
Slow Gear p. 106
Defretter p. 106
Wave Synth p. 107
Guitar Synth p. 107
Sitar Simulator p. 108
Octave p. 109
Pitch Shifter p. 109
Harmonist p. 110
Auto Riff p. 111
Sound Hold p. 112
Processor
p. 112
Acoustic
Feedbacker p. 113
Anti Feedback p. 113
Phaser p. 114
Flanger p. 114
Tremolo p. 115
Rotary p. 115
Uni-V p. 115
Pan p. 115
Slicer p. 116
Vibrato p. 116
Ring Modulator p. 117
Humanizer p. 117
2x2 Chorus p. 118
Sub Delay p. 118

T.WAH (Touch Wah)

You can produce a wah effect with the filter changing in
response to the guitar level.
Parameter/ Explanation
Range
Mode
Selects the wah mode.
This creates a wah effect over a wide fre-
LPF
quency range.
This creates a wah effect in a narrow fre-
BPF
quency range.
Polarity
Selects the direction in which the filter will change in response to
the input.
Up The frequency of the filter will rise.
Down The frequency of the filter will fall.
Sens (Sensitivity)
Adjusts the sensitivity at which the filter
will change in the direction determined
by the polarity setting.
0–100
Higher values will result in a stronger re-
sponse. With a setting of 0, the strength of
picking will have no effect.
Frequency
Adjusts the center frequency of the Wah
0–100
effect.
Peak
Adjusts the way in which the wah effect applies to the area around
the center frequency.
Higher values will produce a stronger
tone which emphasizes the wah effect
0–100
more. With a value of 50 a standard wah
sound will be produced.
EffectLev (Effect Level)
0–100 Adjusts the volume of the effect sound.
DirectLev (Direct Level)
0–100 Adjusts the volume of the direct sound.