Boss GT-10 Owner's Manual page 124

Chapter 8 Parameters Guide
Parameter/ Explanation
Range
Custom
Setting available when Type is set to Custom.
Type
This selects the basic sound when the TYPE parameter is set to
Custom.
This models the sound of the CRY BABY
CRY WAH
wah pedal popular in the '70s.
VO WAH This models the sound of the VOX V846.
Fat WAH This a wah sound featuring a bold tone.
Light WAH This wah has a refined smooth sound.
This expanded wah features a variable
7String WAH range compatible with seven-string and
baritone guitars.
Q
Adjusts the amount of characteristic ef-
0–10
fect applied to the wah tone.
Range Low
Selects the tone produced when the pedal
0–10
is back.
Range High
Selects the tone produced when the pedal
0–10
is forward.
PRESENCE
Adjusts the tonal quality of the wah ef-
0–10
fect.
124
Pedal Bend/PB
This lets you use the pedal to get a pitch bend effect.
Because of the need to analyze the pitch, chords (two or more sounds played
simultaneously) cannot be played.
Parameter/ Explanation
Range
Pitch Min (Pitch Minimum)
This sets the pitch at the point where the
-24–+24
EXP Pedal is fully lifted.
Pitch Max (Pitch Maximum)
This sets the pitch at the point where the
-24–+24
EXP Pedal is all the way down.
Pdl Pos. (Pedal Position)
Adjusts the pedal position for pedal bend.
0–100
This parameter is used after it's been assigned
to an EXP Pedal or similar controller.
EffectLev (Effect Level)
Adjusts the volume of the pitch bend
0–100
sound.
DirectLev (Direct Level)
0–100 Adjusts the volume of the direct sound.