Applying Gt-10 Effects To A Computer's Audio Playback - Boss GT-10 Owner's Manual

Applying GT-10 Effects to a Computer's Audio Playback

In the computer application, set the audio output port to the GT-10.
You can use the GT-10 to apply effects to the audio data played by the computer, then record the data again with the computer.
Use this process when, for example, you want to add effects to existing audio data.
Set the software so audio is not passed through it.
SYSTEM
The SYSTEM MENU screen appears.
1.
Select INPUT/OUTPUT.
2.
The INPUT/OUTPUT screen appears.
3.
Set the INPUT SELECT parameter to USB In.
4.
Parameter/
Explanation
Range
Guitar 1–3
USB In
Chapter 7 Using the GT-10 Connected to a Computer Via USB
Effects are applied to the signals input via the INPUT jacks.
Effects are applied to the signals input via USB.
Set the software so audio is not passed through it.
95