Setting The Effects Simply (Quick Fx); Calling Up Existing Patch Settings - Boss GT-PRO Owner's Manual

Setting the Effects Simply
(QUICK FX)
Each effect includes prepared sample settings called "Quick
Settings."
You can easily create new effect sounds just by selecting and
combining these Quick Settings.
fig.02-0080
1
1. Press the on/off button for the effect with the settings
you want to change.
The parameters for the selected effect appear in the
display.
During editing, the most recently edited parameter
appears (except PPEAMP/SPEAKER).
2. Press PARAMETER [
select screen appears in the display.
fig.02-0090d
3. Rotate the PATCH/VALUE dial to select the Quick
Setting you want.
U**: User Quick Setting (p. 26)
P**: Preset Quick Setting
* "---: User Setting" indicates that the effect indicated in the
upper row of the display is set to be saved to the currently
selected patch, or that the settings are currently being
modified.
* When FX-1 or FX-2 has been selected in Step 1, the settings
for the effect selected by means of the FX1/FX2 Select
parameter (p. 36, p. 45) are switched.
* When Preamp/Speaker has been selected in Step 1, you can
choose different type of settings for channel A and B.
4. Press [EXIT] to return to the Play screen.
5. If you want to save a tone with the settings you've
made, proceed as described in "Storing Patches (Patch
Write)" (p. 24).
* If you want to name the patch or edit the name, proceed to
"Naming Patches (Patch Name)" (p. 23) before you save.
Chapter 2 Creating Your Own Favorite Tones (Patches)
3 2
4 1
] so that the Quick Setting

Calling Up Existing Patch Settings

Just as with the Quick Settings, you can call up and use only
the specific effect settings you need from the User and Preset
patches.
When there is a Preset patch you want to use as material, this
allows you to create patches simply and easily without any
need to make detailed settings.
fig.02-0100
1
1. Press the on/off button for the effect with the settings
you want to change.
The parameters for the selected effect appear in the
display.
2. Press PARAMETER [
select screen appears in the display.
fig.02-0110d
3. Use the PATCH/VALUE dial to select the patch with
the settings you want to call up.
* Patches are displayed following the Quick Settings.
fig.02-0120d
4. Press [EXIT] to return to the Play screen.
5. If you want to save a tone with the settings you've
made, proceed as described in "Storing Patches (Patch
Write)" (p. 24).
* If you want to name the patch or edit the name, proceed to
"Naming Patches (Patch Name)" (p. 23) before you save.
3 2
4 1
] so that the Quick Setting
21