Using The Identical Preamp Settings In All Patches (Preamp Mode); Using The System Preamp; Setting The System Preamp - Boss GT-10 Owner's Manual

Using the Identical Preamp Settings in All Patches (Preamp
Mode)
With the GT-10, you can have a preamp be set globally for use in all patches, allowing you to make settings for three preamp
types.
This provides an effect that always gives you the sound of the same guitar amp regardless of the patches you set.

Using the System Preamp

SYSTEM
The SYSTEM MENU screen appears.
1.
Select PLAY OPTION.
2.
The PLAY OPTION screen appears.
3.
Move the cursor to Preamp Mode.
4.
Select the value of the Preamp Mode parameter you want to set.
5.
Value Explanation
Patch The patch preamp setting is used. This allows you to use different preamp settings in each individual patch.
System1–3 The system's preamp setting is used. This applies the same preamp settings to all patches.

Setting the System Preamp

When Preamp Mode is System1 through System3, the changed preamp setting is saved as the system's preamp setting.
The stored content is updated each time the settings are changed.
Chapter 5 Making Global Settings
69