Pan; Dual-S, Dual-P, Dual-L/R; Warp; Modulate - Boss GT-10 Owner's Manual

Chapter 8 Parameters Guide

Pan

Parameter/ Explanation
Range
Tap Time
Adjusts the delay time of the left channel
delay. This setting adjusts the L channel
0–100%
delay time relative to the R channel delay
time (considered as 100%).

Dual-S, Dual-P, Dual-L/R

Parameter/ Explanation
Range
D1:Time (Delay 1 Time)
D2:Time (Delay 2 Time)
1ms–1700ms,
This determines the delay time.
BPM –BPM
When set to BPM, the value of each parameter will be set accord-
ing to the value of the "Master BPM" (p. 122) specified for each
patch. This makes it easier to achieve effect sound settings that
match the tempo of the song.
When setting to BPM, press [CATEGORY/ENTER] to display the
MASTER BPM screen.
If no operation if performed within a set period of time, the dis-
play returns to the Delay screen.
* If, due to the tempo, the time is longer than the range of allowable
settings, it is then synchronized to a period either 1/2 or 1/4 of that
time.
* After setting D1:Time or D2:Time to a value from 1 ms to 1,700 ms,
you can press [CATEGORY/ENTER] to set the value for D1:Time or
D2:Time to a value from 1 ms to 1,700 ms according to the interval you
press the button.
When Type is set to Dual-S or Dual-P, D1:Time is not changed.
D1:Fbk (Delay 1 Feedback)
D2:Fbk (Delay 2 Feedback)
Adjusts the amount of feedback of the Delay
0–100 1 (or Delay 2). A higher value will increase
the number of the delay repeats.
D1:HiCut (Delay 1 High Cut Filter)
D2:HiCut (Delay 2 High Cut Filter)
This sets the frequency at which the high
cut filter begins to take effect. When
700Hz–11kHz, Flat
"Flat" is selected, the high cut filter will
have no effect.
D1:Level (Delay 1 Level)
D2:Level (Delay 2 Level)
Adjusts the volume of the Delay1 (or De-
0–120
lay 2).
120

Warp

Parameter/ Explanation
Range
Warp Sw
Turns the WARP effect on/off.
Off, On
This parameter is assigned to the
CTL1, CTL2 or CTL 3/4 jack.
Rise Time
Adjusts how rapidly the warped delay
0–100
sound rises.
F.B.Depth (Feedback Depth)
Adjusts the feedback level of the warped
0–100
delay sound.
Level Dep (Level Depth)
Adjusts the volume of the warped delay
0–100
sound.

Modulate

Parameter/ Explanation
Range
Mod.Rate (Modulate Rate)
Adjusts the modulation rate of the delay
0–100
sound.
Mod.Depth (Modulate Depth)
Adjusts the modulation depth of the de-
0–100
lay sound.