Adjusting The Parameters - Boss GT-10 Owner's Manual

Chapter 2 Creating Sounds (Patch Edit)

Adjusting the Parameters

Each effect comprises several different kinds of parameters. You can more precisely create the sounds you want by editing each of
these parameters individually.
The setting screen for the effects appears.
1.
2.
3.
To adjust another effect parameter, repeat Steps 1 and 2.
Operations Using the PARAMETER Knobs
In the effects screens, the knobs correspond to the displayed parameters.
Selecting TYPE for OD/DS or PREAMP
Changing the OD/DS or PREAMP screen to Knob View lets you make the selection for TYPE using the P1 knob and
The TYPE values for OD/DS and PREAMP are grouped into several categories.
P1 knob: This selects the general category for OD/DS (or PREAMP).
: These select the TYPE value within the category.
[ ] and [ ]
For details, refer to "Chapter 8 Parameters Guide" (p. 96).
36
Make the settings for the parameters.
• With [FX-1] and [FX-2], the settings for the
currently selected effect are shown.
• Pressing [MASTER/PEDAL FX] displays the
MST/PDL FX screen.
Some effects include multiple pages for the
parameter settings. You can use [
[ ] to switch the pages.
• If you want to name the patch or edit the name,
proceed to "Naming a Patch (PATCH NAME)"
(p. 41) before you save.
• If you want to save a tone with the settings
you've made, proceed as described in "Saving
a Patch (PATCH WRITE)" (p. 42).
[
] and
.
] and [ ]