Boss GT-10 Owner's Manual page 49

EXP Pedal Function Quick Settings
You can select the Quick Settings by assigning either WAV/FV, PB/FV, WAH, or PB as the EXP Pedal Function.
Selecting these prepared sample settings (Quick Settings) lets you choose optimal values for the related parameters
instantly. This allows you to complete the settings simply and easily without the need to set each parameter individually.
1. Follow the procedure in "Setting CTL/EXP Functions Individually in Each Patch (Pedal FX)" (p. 48) step 1–3 to
display the PDL:CTL/EXP screen.
Select either WAV/FV, PB/FV, WAH, or PB.
2.
The CONTROLLER EXP1 PEDAL SETTING screen (Page 2) appears.
3.
Select the Quick Setting (P01–P08, U01–U10).
4.
Display Explanation
Quick:U** User Quick Settings
Quick:P** Preset Quick Settings
U01-1–U50-4 User Patch
P01-1–P50-4 Preset Patch
5. To save the settings, use the Write procedure (p. 42).
When SYSTEM or CONTROLLER Messages Are Displayed
These appear when the Prefernc parameter for the Controller whose settings you attempted to change (CONTROLLER
screen (p. 137)) is set to System.
This means that the settings in the SW&PDF FUNCTION screen, which are the patch parameters, have no effect.
To enable the settings in the SW&PDF FUNCTION screen, set the Prefernc parameter to Patch beforehand.
To dismiss this message, press [EXIT].
When you select a User patch or Preset patch, you can use the existing patch's
assign settings just as they are.
Chapter 4 Playing Sounds
For information on what
settings you can assign,
refer to "SW&PDL
FUNCTION" (p. 122).
49