Reinstalling The Pci Cage; Reinstalling The Pci Cage; Installing The Pcie Card (In The Low Profile Slot) - HP StorageWorks D2D100 - Backup System User Manual
Hp storageworks d2d4004 and hp d2d4009 backup system user guide (eh938-90924, october 2008)
Hide thumbs
Also See for StorageWorks D2D100 - Backup System:
- Release note (4 pages) ,
- User manual (41 pages) ,
- User manual (176 pages)
Table of Contents
Advertisement
Figure 20 Installing the PCIe card (in the low profile slot)
Reinstalling the PCI Cage
1.
Align the PCI cage to the system board expansion slot, and then press it down to ensure full
connection to the system board.
NOTE:
Be sure to reconnect any cables that you disconnected when you removed the PCI cage.
Figure 21 Reinstalling the PCI cage
2.
Tighten the two captive screws to secure the PCI cage to the chassis.
42
Attaching a physical tape drive (optional)
Advertisement
Table of Contents
