Disk (Status) - HP StorageWorks D2D100 - Backup System User Manual

4. You will see the default virtual SMTP server. Right click on this and select Properties.
5.
Select the Access Control tab and then select Authentication.
6.
The HP D2D Backup System may be used with one of the following settings:
• Anonymous Authentication (anyone can log on, you do not need to provide a Username and
Password when you configure email alerts)
• Basic Authentication, where a user name and password are required and should be provided
when you configure email alerts
NOTE:
Integrated Windows Authentication is not supported with the HP D2D Backup System.
If your SMTP Server requires this form of authentication and you have a spare network
port, we recommend that you create a new virtual SMTP server, allowing connection only
to the HP D2D Backup System. In this instance, you may lock the SMTP server to use
only the HP D2D Backup System's IP address and authentication may safely be set to
anonymous for the dedicated SMTP server.

Disk (Status)

This page provides information about total disk usage and the devices making use of the HP D2D.
Use it to check how individual devices are using the total disk space and when the total disk space
is reaching capacity.
D2D Backup SystemHP D2D4004 and HP D2D4009
81