Advanced Installation; Manual Driver Installation; Hp Lto Tape Driver; Medium Changer Driver - HP StorageWorks D2D100 - Backup System User Manual

Hp storageworks d2d4004 and hp d2d4009 backup system user guide (eh938-90924, october 2008)
Hide thumbs Also See for StorageWorks D2D100 - Backup System:
Table of Contents

Advertisement

4 Advanced installation

The Installation wizard is the recommended way to install the HP D2D Backup System, but it is possible
to install it manually. You may also need to run phases independently when troubleshooting. This
chapter describes:
• "Manual driver
• "Using DHCP to discover the HP D2D (IPv4
• "Using the Discovery Engine to discover the HP D2D (IPv4
• "Using the system console to discover the HP
• "The Microsoft iSCSI
• "Linux and UNIX iSCSI

Manual driver installation

Two drivers are required; an HP LTO Tape driver and a medium changer driver.
NOTE:
Certain backup applications require you to use their own drivers for both the tape device and medium
changer. For many applications these will be installed automatically during the software installation
process. If the backup software is already installed, you may need to manually update the drivers after
installing the HP D2D Backup System.

HP LTO Tape driver

The HP LTO Tape driver must be installed to allow your system to recognize the Ultrium tape devices
created by the HP D2D Backup System.
Tape drivers can be installed from the drivers directory on the HP StorageWorks CD-ROM, where they
are supplied as an installer application and as driver files for manual installation. Also check the HP
website for driver updates at http://www.hp.com/support.
The tape drive is configurable as an LTO-2, LTO-3 or LTO-4 device. This is the default behavior of the tape
drive and there is no need and no way to change it on the HP D2D Backup System. It is important not to
confuse emulation type with cartridge size. Emulation type is totally independent from cartridge size. The
HP D2D Backup System allows you to pick whatever cartridge size you like (up to 800 GB).

Medium changer driver

No additional medium changer driver is required because Microsoft Windows provides a suitable
generic driver and all backup applications provide their own changer drivers.
installation" on page 45
Initiator" on page 51
initiators" on page 57
only)" on page 46
only)" on page 46
D2D" on page 47
D2D Backup SystemHP D2D4004 and HP D2D4009
45

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the StorageWorks D2D100 - Backup System and is the answer not in the manual?

Questions and answers

This manual is also suitable for:

Storageworks d2d4004Storageworks d2d4009

Table of Contents