The Web Management Interface; What Is The Web Management Interface; To Run The Web Management Interface; Summary - HP StorageWorks D2D100 - Backup System User Manual

7 The Web Management Interface

In this chapter:
• "Web management
• "To run the Web Management
• "Summary (Home)" on page 68
• "Devices (Configuration)" on page 69
• "Cartridges (Configuration)" on page 74
• "Network (Configuration)" on page 77
• "Email Alerts
• "Disk
(Status)" on page 81
• "iSCSI (Status)" on page 84
• "Log (Status)" on page 84
• "Shutdown (Settings)" on page 86
• "Admin (Settings)" on page 85
• "Firmware (Settings)" on page 87
• "Support (Settings)" on page 90
• "License (Settings)" on page 90

What is the Web Management interface?

The Web Management Interface is the main interface for:
• Monitoring the status and health of the HP D2D Backup System and all configured backup devices
• Changing the number of cartridge slots or creating additional libraries, or standalone tape
drives, for a host
• Managing movement of data to and from a physical tape drive attached to the HP D2D (if
one has been installed)

To run the Web Management Interface

There are two ways of logging on:
• From the host server or PC: Use the desktop shortcut created by the Installation wizard.
• From any machine connected to the network: The HP D2D uses a secure network connection.
Enter https:// followed by the IP address or fully qualified domain name (for example,
myhpd2d.mydomain.com) of the HP D2D Backup System into the web browser.
NOTE:
If you use http: in the URL, you are automatically forwarded to the https: secure network connection.
The Web Management Interface displays the Login prompt:
The Login is Administrator with an initial password of Admin.
interface" on page 67
Interface" on page 67
(Configuration)" on page 79
D2D Backup SystemHP D2D4004 and HP D2D4009
67