Removing The Hard Drive; Installing A Replacement Hard Disk - HP StorageWorks D2D100 - Backup System User Manual
Hp storageworks d2d4004 and hp d2d4009 backup system user guide (eh938-90924, october 2008)
Hide thumbs
Also See for StorageWorks D2D100 - Backup System:
- Release note (4 pages) ,
- User manual (41 pages) ,
- User manual (176 pages)
Table of Contents
Advertisement
Figure 47 Removing the hard drive
4.
Replace the failed disk with the new disk.
Push the hard drive assembly (1) into the drive bay until it stops and press the HDD carrier latch (2)
inward until it clicks.
Figure 48 Installing a replacement hard disk
5.
After the unit has powered up, log in to the Web Management Interface and select RAID. The status
of the failed disk should now be OK. The RAID will rebuild automatically but can take up to 5 hours.
The RAID Status section displays the Percentage Complete.
128
Hard disk replacement
Advertisement
Table of Contents
