Iscsi (Status); Fibre Channel (Status); Log (Status) - HP StorageWorks D2D100 - Backup System User Manual

iSCSI (Status)

This page shows the iSCSI details for all the devices that are configured on the HP D2D Backup System.
There are three tabs: Media Changer iSCSI details, Drive iSCSI Details and Active Connections. Click on
a device to select it and display the associated iSCSI information.
NOTE:
The Active Connections tab displays information about open iSCSI sessions. If all sessions are inactive
(not connected), this tab is not displayed.
This page is mainly for information and is useful in troubleshooting. It cannot be edited.
If a device is showing as not connected, this indicates that the iSCSI Initiator on the host has
not logged on. Log on using the iSCSI Initiator and set the device as a Persistent Target for that
host. This ensures that it will automatically log on again whenever the host is rebooted. See
"The Microsoft iSCSI

Fibre Channel (Status)

See "Fibre Channel

Log (Status)

This page presents a time and date-stamped list of significant system events. The most recent information
is shown at the top of the list. The icons identify whether the messages are information, error or warning
messages.
The Log is maintained even if the HP D2D Backup System is power cycled. Use the Clear Log button
to clear the log.
84
The Web Management Interface
Initiator" on page 51.
(Status)" on page 61.