10 Restore Processes; Restore Scenarios - HP StorageWorks D2D100 - Backup System User Manual

10 Restore processes

In this chapter:
• "Restore scenarios" on page 111
• "Restore and
• "Restoring single
• "Reconnecting to HP D2D after host

Restore scenarios

The following table illustrates the three main restore scenarios.
Table 13 Restore scenarios
Basic file restore
Restore after
host failure
Restore after site
failure
NOTE:
If you have a backup application that supports One-Button Disaster Recovery and have exported an
OBDR cartridge, you will be able to run OBDR from a tape drive connected directly to the host. This
allows you to reconnect automatically and restores the host system from that cartridge. Please refer to
the tape drive and backup application documentation for more information. The tape drive must also
support OBDR.
deduplication" on page 112
files" on page 112
failure" on page 112
From HP D2D Backup System
Use the backup application to restore files
from the HP D2D to the host, as required.
1. Rebuild the host and reconnect to the
HP D2D.
2.
Use the backup application to restore
files from the HP D2D to the host.
From a physical tape drive connected to
the HP D2D
1. Replace the HP D2D.
2. Rebuild the host and reconnect to the
HP D2D.
3.
Import the cartridge from the attached
tape drive.
• If the tape drive is attached to the
HP D2D, use the Web Management
Interface to import the cartridge to
the HP D2D mail slot. Then use
the backup application to move the
cartridge back into the library slot
on the HP D2D and restore data to
the host. See Chapter 7.
• If the tape drive is attached to the
host, use the backup application
to restore data to the host. See
Chapter 8.
D2D Backup SystemHP D2D4004 and HP D2D4009
111