The Microsoft Iscsi Initiator; General Tab - HP StorageWorks D2D100 - Backup System User Manual

entered in exactly the same format in both the Web Management Interface and the iSCSI initiator.
An 'Authentication Failure' message will occur if the same 'secret' and 'user name' information are
not entered into the iSCSI Initiator screen and the Web Management Interface. Further details on
authentication and CHAP can be found within standard iSCSI protocol documentation.
The recommended process if you wish to enable authentication is:
1.
Create the devices on the Web Management Interface.
2.
Set up the Targets in the iSCSI Initiator.
3.
Connect to the devices using the CHAP user name and secret that you configured on the Targets tab.

The Microsoft iSCSI Initiator

The Microsoft iSCSI initiator contains a number of tabs. This section describes the information that must
be provided in order to connect the host to a device on the HP D2D Backup System. It does not provide
a comprehensive description of all the tabs; please download the "User Guide" from the Microsoft
website for more information.

General tab

You do not normally need to make any changes on the General tab. The Initiator Node Name is
generated automatically, which guarantees that it will be unique on your network.
D2D Backup SystemHP D2D4004 and HP D2D4009
51