Status (Tape Attach); To Cancel A Job - HP StorageWorks D2D100 - Backup System User Manual

5. Once the import has completed successfully, the cartridge is in the mail slot. Use the backup
application to move the data back into the library slots. Backup applications have a number of
terms to describe this action, such as insert. Refer to the documentation supplied with your backup
application for further details.
• If it is less than 400 GB, the cartridge Max Size is set to 400 GB.
• If it is over 400 GB, the cartridge Max Size is set to 800 GB.
• If it is over 800 GB, the cartridge Max Size is set to 800 GB. Cartridges over 800 GB are not
writeable.
• The Used Size is always reported correctly.

Status (Tape Attach)

This page displays the status of any current tape import/export or copy operations.
If a job is in progress, it shows cartridge barcode and target tape drive details and relevant progress
bars. The percentage completion is the amount of progress for all relevant activities in the operation,
such as export and verify (if requested).
Once an export job has completed successfully, the cartridge is removed from the HP D2D Backup
System and the mail slot will have hyphens on the Cartridges page to show that it is empty (with the
option to Create a blank cartridge).
NOTE:
If no operations are currently in progress, a link will be provided to the Tape Attach Job History page.

To cancel a job

To cancel a job in progress, click Cancel . You are asked to confirm that you wish to cancel the job.
If a job is canceled during the copy, export or import phase, this cancels the transfer of data.
• For export and copy jobs, the data remains in the mail slot or slot on the HP D2D Backup System
and the physical tape on the tape drive is rewound and erased.
D2D Backup SystemHP D2D4004 and HP D2D4009
103